|
||||||||||||||||||||||||||||||
[發表評論] [本類其他產品] [本類其他供應商] [收藏] |
銷售商: 北京博德恒悅科貿有限公司耗材部 | 查看該公司所有產品 >> |
產品名稱:Fittings and Connectors
品牌:GE
Description
|
Picture
|
UniFit Connector The UniFit sample tube connector is used with U-Series nebulizers, recognized by the letter U in the part number (eg. AR30-07-USS2E). The tubing is available in a range of internal and external diameters and the part numbers have the prefix NFT (eg. NFT-075). See full range of UniFit connectors.
|
|
EzyFit Connector The EzyFit sample tube connector is used with EzyFit nebulizers, recognized by the letter F in the part number (eg. AR30-07-FSS2E). The tubing is available in a range of internal and external diameters and the part numbers have the prefix EZT (eg. EZT-075). See full range of EzyFit connectors. |
|
EzyLok Kit, EL-1 The Ezylok is a quick-connect fitting for the nebulizer argon connection. It is supplied with all glass concentric nebulizers which have an E at the end of the part number (eg. AR30-07-USS2E). |
|
LC Fittings Kit, FT-16-8 This kit provides quick and easy connection between an HPLC system and any U-Series nebulizer. |
|
Helix Locking Screw, 70-100-0152 The Helix Locking Screw is supplied with all spray chambers which have the Helix nebulizer interface. |
|
Helix Seal The Helix Seal is supplied with all spray chambers which have the Helix nebulizer interface. Replacements are supplied in a pack of 4 under part number 70-100-0237. |
|
Drain Connector Spray chambers with a 4mm drain outlet are supplied with a UniFit connector and tubing. Replacements are supplied in packs of 3 as UFT-075 for 1.3mm OD tubing or UFT-16-75 for 1.6mm OD tubing. |
|
GazFit Connectors The GazFit connector provides a simple and reliable way to connect the argon lines to the torch. GazFit connectors are available to suit torches with 8mm (GAZ-08), 6mm (GAZ-06), 5mm (GAZ-05), 4mm (GAZ-04) and 6mm/4mm (GAZ-0604) diameter side arms. |
|
Reagent Tube with PTFE Sinker, 70-803-0752 This tubing ensures that the sample tubing stays in the solution. |
|
O-Ring for Nebulizer Seal This o-ring is used in spray chambers which do not have the Helix fitting. It is supplied in a pack of 10 as part number VT-009. |