實驗室裝修講解鋼木實驗臺的安裝

實驗室裝修講解鋼木實驗臺的安裝

專業實驗室設計、一流實驗室設計施工、上海專業實驗室、實驗室裝修公司、專業實驗室設計專家

Laboratory renovation on experimental installation of steel and wood

第一步：觀察鋼架的正，側面，在鋼架上標出柜體的高度或做一個與柜高度相同的靠柵。

The first step: positive, sides of the steel frame, steel frame out in cabinet height or do a highly identical with the cabinet by the gate.

第二步：按照實驗臺的總長度，選擇出相合適的橫梁，用自鉆螺絲把橫梁固定到鋼架上

The second step: in accordance with the total length of experimental

 select suitable for the beam, the beam self drilling screws fixed to the steel frame.

第三步：用水平尺檢查鋼架的橫﹑縱線，是否水平實驗室裝修

The third step: the transverse, longitudinal level check steel frame, whether level

第四步：在確保水平的前提下，方可掛吊柜體。

The fourth step: to ensure the level of the premise, can be hanging cabinet.

第五步：把裝好滑軌的抽屜填進柜體，在抽屜上4mm麻花鉆頭頂打四只孔

The fifth step: loaded sliding rail drawer filled into the cabinet, drill 4mm Hemp flowers on the drawer head playing four holes

第六步：黏結臺面的步驟﹑要求與全鋼一樣。鋼木結構通常先裝抽面，后安裝臺面，若臺面上有試劑架安裝，待膠固化后再行安裝操作。

The sixth step: bonding mesa steps, requirements and all steel. Steel and wood structure is usually installed in the first pumping surface, after the installation of mesa, if the table has the reagent frame installation, after the glue curing after installation and operation.